From Beachside condos to Mainland neighborhoods and the LPGA Boulevard corridor, Daytona Beach's water supply and plumbing conditions vary block by block. We test on-site so you know exactly what's coming out of your tap.
Daytona Beach is split by the Halifax River into Beachside and Mainland, and the housing stock ranges from historic homes near downtown to fast-growing new construction along LPGA Boulevard and Tomoka Farms Road. Each area presents different water conditions.
Older homes near downtown and Midtown frequently show detectable lead readings tied to plumbing installed before 1986. Newer developments along LPGA tend to test with higher hardness due to well-fed irrigation systems interacting with municipal supply lines during dry months.
Local Water Note: Daytona Beach's own 2026 water quality report confirms PFAS compounds detected directly in the treated municipal supply (see below) — not just in nearby springs. University of Florida Health researchers also found PFAS above EPA limits at several regional springs, consistent with an active PFAS pathway in the area's groundwater. Municipal treatment removes bacteria and adjusts pH, but it does not remove PFAS.
What the City's Own 2026 Water Quality Report Shows
Every year, the City of Daytona Beach Utilities Department publishes a Consumer Confidence Report detailing exactly what's in the municipal water supply. We read the full 2026 report so you don't have to. Here's what stood out.
PFAS detected directly in Daytona Beach tap water. The city's own August 2024 testing found two PFAS compounds present in the municipal supply: PFHxS at 6.9 parts per trillion and PFPeA at 3.2 parts per trillion. Neither currently has a federal limit, so this isn't listed as a violation — but it confirms PFAS is present in the water coming out of the tap, not just in nearby springs.
A coliform bacteria issue in February 2025. The city detected total coliform bacteria above the 5% threshold across the distribution system, triggering a required Level 1 assessment. The cause was traced to sediment buildup during softener maintenance and autoflushers being temporarily offline. The city completed corrective action, cleaned sample stations, and brought a new 5-million-gallon storage tank online. Resolved, but a real example of what can happen in a large distribution system.
Disinfection byproducts running close to their limits. Total trihalomethanes (TTHM) peaked at 58.7 ppb on average, with individual samples as high as 77.5 ppb against an 80 ppb legal limit. These byproducts form when chloramine disinfectant reacts with organic material in the water — technically compliant, but with limited room to spare.
Source: City of Daytona Beach Utilities Department, 2026 Water Quality Report (data collected calendar year 2025). Read the full official report at
daytonabeach.gov/WaterQualityReport.
What Daytona Beach Homeowners Ask Us Most
"Beachside water tastes different than Mainland." — Salt intrusion and coastal aquifer conditions can affect taste and mineral content differently near the coast versus inland. A test tells you exactly what's different.
"My historic Midtown home has old pipes — should I worry about lead?" — Homes built before 1986 are the highest-risk category. An RO system at the kitchan sink removes lead reliably.
"New construction near LPGA still has hard water — why?" — New pipes don't change what's in the water supply itself. Hardness comes from the aquifer, not your plumbing age.
Find Out What's In Your Daytona Beach Water
A 30-minute in-home test. Real numbers. No cost, no obligation.